Fein tool teak blade

You and a multitude of users in various sectors worldwide benefit from our state-of-the-art tools. We aren't just proud of that, but we're certain that our products will deliver reliable and smooth results for many years to come too.

Or feel free to contact your FEIN dealer. He will be happy to help you. It provides a three year manufacturer's warranty against faulty workmanship and defective materials for registered power tools, subject to the conditions below.

The warranty period for all FEIN power tools, Slugger belt grinding machines, li-ion batteries and associated chargers purchased from an authorized dealer after The purchaser is responsible for registration online here.

The registration receipt, which must be printed immediately, and the original sales receipt bearing the date of purchase are valid as confirmation. Registration only takes place if the purchaser agrees to storage of the requested data. In the event of faulty workmanship or defective material, repair will be made free of charge or - if a repair is not possible - the device will be exchanged for a new one, or a later model, if necessary.

This warranty does not cover damage caused by improper use, such as failure to comply with operating instructions, overloading, operation with incorrect voltage, wrong current type, unsuitable accessories or external effects such as dropping or impact. Furthermore, normal wear and tear is not covered by the warranty. The guarantee for Li-ion batteries is limited to charging cycles.

In the event of exercise of claims arising from this guarantee, the power tool in question must be presented or returned with the original purchase receipt bearing date of purchase and model designation and the registration receipt. By signing into your account, you represent that you have read and agree to our Terms and our Privacy Policy. Fein Starlock Plus Teak Blades are the fastest, safest way to remove old caulking, adhesive or sealant from between your teak deck boards without damage to the wood.

The end of the blade is shaped to scoop out the old caulking, leaving enough room to re-apply new caulking. To prevent damage to your decking, select a blade that is slightly smaller than the caulk line you want to remove.

Check for compatibility with your OMT manufacturer. Fein's 3D, snap-in Starlock mounting system is the new standard for Fein oscillating multi-tools. This innovative design allows Starlock accessories to be interlocked in three dimensions for better stability, increased efficiency, and greater safety. Starlock accessories are available in standard Starlock, Starlock Plus, and Starlock Max versions designed for use with specific Fein multitool power ranges for greater longevity of the multitool itself.

April 14, It requires a steady hand and good eye sight. It will cut the teak just as easy as the old grout. January 20, I first tried a utility knife and scrapper. It took way too much time and energy. Then I tried a router.

That was way too hard too control. I go down one side then down the other side of the channel. Takes longer but is much easier to control.

Also the bottom of the cutter has a rounded bottom so you will have to scrap the caulk out of the bottom corners with a caulk scraper. January 2, Great blade. Stays sharp a very long time. Used it for teak seam caulk removal but also good for cutting coves lines in hull planking.

June 9, Excellent Blade! I used it to remove the caulk from the entire deck on my 42' Grand Banks. With the FEIN accessories for sanding, you can work trouble-free in corners, narrow places, tight spaces or on edges — dust-free thanks to anti-static extraction. All triangular sanding pads edge lengths 80 and mm as well as the sanding finger and the profile sanding kit are all suitable for sanding in places that are difficult to access. Top accessories: Top accessories: Top accessories: You can trim door jambs in a jiffy.

With simple and fast plunge cuts, you saw both the hole and the tongue. You work quickly with clean sawed edges at exact depths — and are close to the edge. Your best MultiTool for window construction. Select from a wide range of accessories for your special tasks in window construction. E-Cut Long-Life saw blades and bimetal segment saw blades defy nails in wood and enable sawing flush with the surface without wall damage and plunge cuts up to 90 mm.

With the segment saw blade, you can saw flush with the surface and make separation cuts up to corners without damaging the wooden frame. That is also possible for fixed glazing on construction sites. Top accessories: Top accessories: For very narrow, deep areas in channels, grooves, openings, and folds, use the sanding finger. Top accessories: Top accessories: Top accessories: Top accessories: Nails in the wood are easily sawed through.

With it, panes can be removed flush — without any risk of injury from the machine or accessories. The extremely flat triangular sanding pad enables you to consistently process very tight gaps as well. The plastic carrier plate prevents damage to and marking on the slats. Your best MultiTool for tile and bathroom renovation. Wide variety of accessories for plumbing and tile professionals.

To remove old tiles, you simply remove the grout with the right saw blade. As you work, you generate a minimum of dust and avoid overcuts — even in corners and at edges. You have the choice between a carbide saw blade and a particularly robust diamond saw blade.

With the carbide rasp, you create a clean, even substrate for the new tiles. The triangular shape enables you to work in any corner and the perforation accommodates a dust extraction system. The variant with a mm edge length ensures fast work progress on large surfaces.

The finger rasp is designed for use in very narrow and hard-to-reach spots in channels, grooves, openings, and rabbets. The mushroom-shaped cutting blade is ideal for cutting silicone.

With the short version of the flexible scraper blade, you can remove both elastic silicone grout and acrylic grout. Your best MultiTool for laying floors. A broad range of accessories related to floor coverings. You saw flush with the surface. Do you have to retrofit expansion joints in parquet flooring?

Use it to work at speed, cleanly, and close to edges at a precise depth. Use the E-Cut saw blades to make precise, short plunge cuts in baseboards made of wood or metal — close to the floor or near edges. No clearance required behind the workpiece. The scraper is extremely rigid and durable. With the multi-cutting blade, you can easily replace carpeting and other soft floor coverings made of plastic or rubber or cut them to shape. Thanks to three cutting edges that work with tension and pressure, the blade has multiple applications.

Corners, edges, tight spaces or narrow gaps? No problem with the FEIN accessories for sanding. Use them to work anywhere — thanks to anti-static extraction, even dust free.