Ibm server raid manager for windows 2008

The card supports a number of features that are able to be implemented without rebooting the server. Applications such as email and web server benefit from avoiding downtime during transition.

Online Capacity Expansion OCE allows the capacity of a virtual disk to be expanded by adding new physical disks or making use of unused space on existing disks, without requiring a reboot. System availability and application functionality remain unaffected. Consistency Check verifies that all stripes in a virtual disk with a redundant RAID level are consistent.

Consistency checks can be scheduled to take place periodically. Management tools provide convenience for configuration of logical volumes plus alerting when errors have occurred or are about to occur. Patrol read is a background sentry service designed to proactively discover and correct media defects bad sectors that arise normally as a disk drive ages.

The service issues a series of verify commands and if a bad block is discovered, the card's firmware will use RAID algorithms to recreate the missing data and remap the sector to a good sector.

The task is interruptible based on controller activity and host operations. The firmware also provides an interface where the patrol read task can be initiated, set up for continuous operation, and terminated from a management application. Patrol read can be activated by manual command or automatically. A hot spare rebuilds data from all virtual disks within the disk group in which it is configured. ServeRAID provides the ability to define a physical disk as a hot spare to replace a failed drive.

Hot spares may be configured as either global or dedicated. These files contain additional information on what updates the UXSP Installer attempted to apply to the target system. Return codes and in the file UX. LOG indicate an update that could not be installed because the applicable hardware was not present. Altiris jobs might show an error after attempting to deploy UXSPs if the applicable hardware is not present in the target server. To determine whether this is the cause of the error, follow these steps: Right-click on the failed job under your system in the Altiris Console and select Properties.

The status detail window will refer you to the file ToolkitProcess. LOG on the target server. Return codes and in this file indicate an update that could not be installed because the applicable hardware was not present on the target server. When installing Windows Server to a system with a fibre adapter, the installation can fail with the error message "QL Press any key to continue. To sucessfully install Windows Server to a system with a fibre adapter, you must use Windows Server with Service Pack 2.

Some system updates may result in boot issues, or may fail and require user intervention during automated Toolkit installs. This error can occur for different reasons including the installation drive having previously been formatted as a GPT drive or having a different OS previously installed on the system.

To resolve this issue, first restart the system and retry the Windows installation. If this does not resolve the issue then delete all partitions and formatting on the drives in the system and retry the Windows installation. If this does not resolve the issue and the system has multiple storage adapters, please see "Installing an operating system on a multi-adapter system" in Appendix D of the User's Guide and the readme note for Windows Server Install with multiple RAID controllers for more information.

When performing a Windows installation, ServerGuide Scripting Toolkit attempts to install Windows on the first disk of the system presented by Microsoft's diskpart utility. Due to the limitations of the system, when multiple storage adapters are present on the system, the first disk presented by the diskpart utility is not always the the first disk on the system. The computer name used for Windows installations must comply to Windows restrictions.

If it does not, you will receive an error during unattended Windows installations saying: Windows could not parse or process the unattended answer file for pass specialize. The settings specified in the answer file cannot be applied. The error was detected while processing settings for component [Microsoft-Windows-Shell-Setup]. Clicking the broswe button when using the Scripting Toolkit Configuration Utility to copy files to the Toolkit source server may give a blank window without a folder browser.

If this occurs, the source path of the files to copy must be typed directly into the source path input box. If the Toolkit deployment process is hung at a point where it is waiting for a key press to restart the system, reboot the remote system using the remote console and the install will proceed successfully. At any other point, the system must be rebooted via the remote console, and the deploymented restarted from the beginnning.

This is due to the package reporting completion while subprocesseses are still running. Those subprocess may utilize your system's resource at a level that causes other updates to fail.

To install the remaining hardware devices run your UXSP installation again without the exclusions, and the Intel package s will install successfully. Leave a Reply Cancel reply Enter your comment here Fill in your details below or click an icon to log in:. Email required Address never made public. Name required. Search My Blog. Search for:. Syed Jahanzaib FB Link.

Follow Following. Join 1, other followers. Improve this answer. DutchUncle DutchUncle 1, 8 8 silver badges 16 16 bronze badges. Sign up or log in Sign up using Google. Sign up using Facebook. Sign up using Email and Password. Post as a guest Name. Email Required, but never shown. The Overflow Blog.